![](../images/chemdb_main_product.jpg) |
![](../images/title_product_content.gif) |
|
|
|
Thiate H |
![](../images/col_chem_name.gif) |
1,3-Dibutyl-2-thiourea |
![](../images/col_chem_composition.gif) |
1,3-Dibutylthiourea |
![](../images/col_cas.gif) |
105-55-5 |
![](../images/col_uses.gif) |
For CR, EPDM and chlorobutyl. For fast initial set up, continuous cured sponge, LCM extrusions and hot air cures. Suggested usage 0.5 to 1.0% on polymer. In CR systems, this accelerator is noted for its ability to import very low compression set valves. |
![](../images/col_property.gif) |
Composition: 1,3-diethylthiourea Physical State: White solid * Specification - Ash Content at 900'C 0.30% maximum - Heat Loss at 60'C 0.30% maximum - Melting Point, DSC 76.0-80.0'C * GENERAL INFORMATION : Typical values not routinely measured or reported on the Certificate of Analysis. - Density at 25'C : 1.10 Mg/m3 - Solubility : Soluble in acetone, chloroform and methanol. Practically insoluble in petroleum ether or water. |
Industrial field |
additive, rubber & additives |
|
|
![](../images/product_title_com.gif) |
|
|
|
![](../images/box_com_top2.gif) |
There are no existing companies to distribute selected chemical product |
|
![](../images/box_com_bottom.gif) |
|
|
|