 |
 |
|
|
|
| Erisys GE-10 |
 |
| 3320-79-9 |
 |
ERISYS GE-10, epoxidized ortho cresol, is a low viscosity, aromatic, mono-epoxide. It is intended for use as a reactive diluent for high viscosity epoxy resins. GE-10 is compatible at all concentrations with those resins and resin/diluent blends can be cured using any epoxy resins curing agents.
GE-10, due to its structure, is not as efficient in viscosity reduction as aliphatic diluents ERISYS GE-5, GE-6, GE-7 or GE-8. However, the performance properties of epoxy formulations diluted with GE-10 are modified less than those of systems containing the aliphatic monofunctional diluents. Depending on concentration, properties such as gel time, room temperature strength and modulus of a GE-10 diluted formulation remain relatively unchanged compared to an undiluted mix. A decline in elevated temperature performance, as indicated by decreasing Tg with increasing GE-10 concentration, occurs (see table and graphs below). A further feature of GE-10 is its ability to reduce the tendency of certain epoxy resins to crystallize, thereby producing formulations with improved homogeneity. ERISYS GE10' s low vapor pressure and exceptionally low residual epichlorohydrin level make it ideally suited for environmentally difficult applications such as floor coating and concrete repair.
* APPLICATIONS
- Chemical Resistant Coatings
- Flooring
- Concrete/Civil Engineering Adhesives
- General Purpose Adhesives
- Tooling
- Specialized Curing Agent Adducts |
 |
Appearance : Clear, Clean
Viscosity @ 25'C, cps : 5 ?10
Epoxide Equivalent Weight, g/eq : 170 ?195
Gardner Color, max : 1
Residual Epichlorohydrin, max ppm : 10
Hydrolyzable Chloride, max % : 0.10
Weight per Gallon, @ 25'C, lbs. : 9.0 + 0.1
Water Content, max % : 0.10
Flash Point, 'C ('F) : > 121 (> 250) |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
